Job Opportunities at Bulyanhulu Gold Mine / Barrick

Bulyanhulu Gold Mine is seeking to recruit Paste Fill QA/QC Technician to join our team. The successful candidate for this position is expected to align to the Barrick DNA and drive a change within his team and the business and on a practical note will ensure activities in the mining department are effectively planned and undertaken in a safe and cost effective manner to achieve targets in accordance to BGML Mining Safety Standards, Policies and Procedures.

Reporting to: Geotechnical Engineer -Paste fill

Duration: Permanent

RESPONSIBILITIES:

Ensuring all tasks or activities are executed and aligned with safety standard operating procedures and safe work instructions at all times
Performing all underground backfill inspections/audits to ensure compliance to piping support and layout standards, barricade construction standards as well as supervision of drill rig set-ups for paste hole drilling.
Conducting routine paste borehole inspections and report on hole conditions to the backfill department.
Doing all backfill activities carried out with minimal interruption to production work and be carried out safely
Conduct inspections/audits to ensure adherence to piping layouts and drilling designs for the paste reticulation system.
Conduct routine down-hole borehole surveys of paste holes and report on observed conditions. Records of this should be maintained and stored.
Conduct inspections/audits to ensure that the QAQC paste sampling, strength and slump testing, moisture content, percentage solids, is being carried out according to the instructions and in the correct manner.
Ensure that the recommended paste is being poured. This entails ensuring the correct slump and recipe by being present at the plant during pours.
Liaise with Mining Engineering, Mining Services, and Paste Plant operations in all aspects of backfill

QUALIFICATION REQUIREMENTS:

Diploma In Civil Engineering /Mining Engineering/ Geology or any equivalent

Valid Driving License

EXPERIENCE REQUIREMENTS:

Must have a minimum of 1 years work experience in underground mining operations
Must have detailed knowledge and experience in perform all underground backfill inspections/audits.

SKILLS / KNOWLEDGE REQUIREMENTS:

Excellent communication in English ,both writing and verbal
Hazard identification and Risk assessment
Mine health &Safety Act awareness
Must have thoroughly understanding to perform all underground backfill inspections/audits
WHAT WE CAN OFFER YOU:
A comprehensive compensation package including bonuses, benefits, and where applicable.
Ability to make a difference and lasting impact.
Work in a dynamic, collaborative, progressive, and high-performing team.
Opportunities to grow and learn with the industry colleagues are endless.

HOW TO APPLY:

Rename your CV in this format CV – YOUR FULL NAME

Indicating the role title “PASTE FILL QA/QC TECHINICAN “ in the subject of your email

Send your application via e-mail to: [email protected]

If you are not contacted by Barrick – Bulyanhulu Gold Mine LTD within thirty (30) days after the closing date, you should consider your application as unsuccessful. Short listed candidates may be subjected to any of the following: security clearance; competency assessment; physical capability assessment, reference checking.

Please forward applications before 2rd September 2021

BEWARE OF CONMEN! BGML does not receive money in exchange for a job position. Should you be asked for money in exchange for a job offer or suspect such activity, please report this immediately to our Compliance Hotline, by calling Toll-Free Number +1-877-246-5399 or through www.barrickgold.ethispoint.com

Boilermaker / Welder

Reporting to: Paste Mining Supervisor

Duration: Permanent

RESPONSIBILITIES:

Ensuring all tasks or activities are executed and aligned with standard operating procedures and safe work instructions at all times
Welding and fabricating in both workshop and in field underground environments.
Reading and interpreting designs and construction plans
Ensure proper hot work procedures are strictly followed
Provide reliable and accurate operational knowledge and practical application to minimise down time and loss of production
Planning and mobilizing equipment to hot work site
Perform other duties as may be reasonably assigned by your supervisor

QUALIFICATION REQUIREMENTS:

Ordinary secondary education (Form IV)
Must possess a valid Driver’s License with defensive driving skills
Basic knowledge of U/G paste systems, mine rescue and valid First Aid certificates will be an added advantage

EXPERIENCE REQUIREMENTS:

Must have a minimum of 3 years work experience in underground mining operation
Must have detailed knowledge and experience in the operation of multiple metal cutting, welding and fabrication methods.

SKILLS / KNOWLEDGE REQUIREMENTS:

Excellent communication in English ,both writing and verbal
Hazard identification and Risk assessment
Mine health &Safety Act awareness
Must have good understanding of underground mining operations and solid safety performance at the personal and professional level
Must be able to read and understand designed paste line and equipment plans, detailed engineered prints and layouts

WHAT WE CAN OFFER YOU:

A comprehensive compensation package including bonuses, benefits, and where applicable.
Ability to make a difference and lasting impact.
Work in a dynamic, collaborative, progressive, and high-performing team.
Opportunities to grow and learn with the industry colleagues are endless.

HOW TO APPLY:

Applicants are invited to submit their CV’s/Resume’s, careful read application guidelines

Rename your CV in this format CV – YOUR FULL NAME

Indicating the role title “BOILERMAKER / WELDER “ in the subject of your email

Send your application via e-mail to: [email protected]

Please forward applications before 2rd September 2021

POSITION DESCRIPTION:

Bulyanhulu Gold Mine is seeking to recruit Tribologist to join our team. The successful candidate for this position is expected to align to the Barrick DNA and drive a change within his team and the business and on a practical note will ensure activities in the Engineering department are effectively planned and undertaken in a safe and cost effective manner to achieve targets in accordance to BGML Mining Safety Standards, Policies and Procedures.

Reporting to: Foreman – Engineering

Duration: Permanent

RESPONSIBILITIES:

Ensure safe work practices by attending compulsory safety courses and meetings
Wear the appropriate PPE for the task at hand;
Assist and conduct incident/accident investigations;
Comply with Occupational Health and Environmental Policies, as well as other policies, procedures and guidelines;
Comply with chemical management standard operating procedure BUL-ENV-FOR-0003.
Comply with tools validation/calibration as per OEM recommendation
Adhere to laboratory standard operation procedure and guidelines
Conduct metals test and analysis of results for fresh and used oils
Conduct viscosity test and analysis of results for fresh and used oils
Conduct particle count test and analysis of results for fresh and used oil as per ISO 4406 Standard
Conduct flash point test and analysis of results for diesel new batches
Conduct dissolve gasses test and analysis of results for transformer oil
Conduct dielectric strength test and analysis of results for transformer oil
Ensure report for analysis of results shared with maintenance team before machine is in for PM Service.
Conduct any other tasks assigned by Foreman Asset Reliability

QUALIFICATION REQUIREMENTS:

Ordinary level certificate – Form IV

Laboratory Technology – (FTC, Diploma)

EXPERIENCE REQUIREMENTS:

Must have a minimum of 3-5 Years’ experience in Oil Analysis as Chemist/ laboratory Technician

SKILLS / KNOWLEDGE REQUIREMENTS:

Excellent communication in English ,both writing and verbal
Hazard identification and Risk assessment
Mine health &Safety Act awareness
Must have good understanding of Basic Computer Skills

WHAT WE CAN OFFER YOU:

A comprehensive compensation package including bonuses, benefits, and where applicable.
Ability to make a difference and lasting impact.
Work in a dynamic, collaborative, progressive, and high-performing team.
Opportunities to grow and learn with the industry colleagues are endless.

HOW TO APPLY:

Applicants are invited to submit their CV’s/Resume’s, careful read application guidelines

Rename your CV in this format CV – YOUR FULL NAME

Indicating the role title “TRIBOLOGIST “ in the subject of your email

Send your application via e-mail to: [email protected]

Please forward applications before 2rd September 2021

Position Description

Bulyanhulu Gold Mine is seeking to recruit Maintenance Scheduler to join our team. The successful candidate for this position is expected to align to the Barrick DNA and drive a change within his team and the business and on a practical note will ensure activities in the Planning Section are effectively planned and undertaken in a safe and cost effective manner to achieve targets in accordance to BGML Mining Safety Standards, Policies and Procedures.

Reporting to: Process Mechanical Section Leader

Duration: Permanent

Responsibilities

Ensure safe work practices, i.e. attending compulsory safety courses and meetings, use of required PPE, incident/accident reporting and ensuring total adherence to all Safety, Occupational Health and Environmental Policies, as well as other relevant policies, procedures and guidelines.
Monitor the execution of the work of pertaining to critical information that must be recorded for future references
Achieve the departmental and organizational objectives.
To ensure proper scheduling of planned jobs for carrying out preventive maintenance.
Verify all completed work orders are closed off for the previous period
To ensure proper scheduling of planned jobs for carrying out preventive maintenance.
To coordinate with the planners and supervisors to ensure timely completion of break down maintenances.
Reports status of all shutdowns and preventative maintenance to supervisor.
Formulates weekly schedule of estimated jobs and assigns to appropriate shops; coordinates with material control on material status.
To review, verify, follow up and return completed on all raised work order.
Ensure all non-compliances are reported to the planning section and necessary corrective and preventive actions to be taken.
Optimize Bulyanhulu’s maintenance performance by using best practices maintenance planning and scheduling techniques and the Pronto maintenance management system.
Provide materials, tools, services and equipment through requisitioning, storehouse stock, or rentals (for non-emergency work only).
Achieve the departmental and organizational objectives.
Continual improvement initiatives and cost control measures.
Qualification Requirements
Mechanical / Electrical Certificate – (VETA Grade I, FTC, Diploma)
Experience Requirements
Minimum of 3 years in maintenance and planning experience.
Experience in a mining environment is highly desirable
Skills / Knowledge Requirements
Ability to read and understand Process and Mechanical drawing
Excellent communication in English and Swahili language
Knowledge in Computer Software
Knowledge in using computerized maintenance management system (i.e. Pronto)
Solid understand of maintenance planning and sched
What We Can Offer You
A comprehensive compensation package including bonuses, benefits, and where applicable.
Ability to make a difference and lasting impact.
Work in a dynamic, collaborative, progressive, and high-performing team.
Opportunities to grow and learn with the industry colleagues are endleuling concepts

How To Apply

Applicants are invited to submit their CV’s/Resume’s, careful read application guidelines

Rename your CV in this format CV – YOUR FULL NAME

Indicating the role title “MAINTENANCE SCHEDULER“ in the subject of your email

Send your application via e-mail to: [email protected]

If you are not contacted by Barrick- Bulyanhulu Gold Mine LTD within thirty (30) days after the closing date, you should consider your application as unsuccessful. Short listed candidates may be subjected to any of the following: security clearance; competency assessment; physical capability assessment, reference checking.

Please forward applications before 02nd September 2021

Bulyanhulu Gold Mine is seeking to recruit underground Electrician to join our team. The successful candidate for this position is expected to align to the Barrick DNA and drive a change within his team and the business and on a practical note will ensure activities in the Engineering and Services department are effectively planned and undertaken in a safe and cost effective manner to achieve targets in accordance to BGML Mining Safety Standards, Policies and Procedures.

Reporting to: Engineering Supervisor

Duration: Permanent

Responsibilities

Ensure safe work practices by attending compulsory safety courses and meetings;
Wear the appropriate PPE for the task at hand;
Assist and conduct incident/accident investigations;
Comply with Occupational Health and Environmental Policies, as well as other policies, procedures and guidelines;
Install and maintain of all electrical equipment to reduce unplanned maintenance and optimize availability.
Overhaul electrical equipment in accordance with set company policies and procedures.
Complete required testing and safety checks on specified electrical equipment.
Attend to breakdowns and complete necessary fault-finding.
Carry out defined and necessary electrical equipment checks.
Ensure total adherence to all safety, health and environmental procedures and guidelines as well as all other company policies and procedures.
Complete modifications to electrical equipment in accordance with specified instructions.
Under the direction of the supervisor, provide appropriate on-the-job training and coaching to less experience personnel.
Implementation and execution of all tasks and instructions as instructed by superiors
Qualification Requirements
Ordinary/Advanced level certificate – Form IV/VI
Electrical trade certificate – (FTC/IMTT / VETA)
Valid driving license
Experience Requirements
5 Years’ experience on industrial electrical
Underground mining experience is added advantage

Skills / Knowledge Requirements

Computer literate in the Microsoft Package Applications – Word, Excel, PowerPoint, Project and Visio.
Excellent communication in English ,both writing and verbal
Hazard identification and Risk assessment
Mine health &Safety Act awareness

What We Can Offer You

A comprehensive compensation package including bonuses, benefits, and where applicable.
Ability to make a difference and lasting impact.
Work in a dynamic, collaborative, progressive, and high-performing team.
Opportunities to grow and learn with the industry colleagues are endless

How To Apply

Applicants are invited to submit their CV’s/Resume’s, careful read application guidelines

Rename your CV in this format CV – YOUR FULL NAME

Indicating the role title “ELECTRICIAN“ in the subject of your email

Send your application via e-mail to: [email protected]

Please forward applications before 02ndSeptember 2021

Bulyanhulu Gold Mine is seeking to recruit HV Electrician to join our team. The successful candidate for this position is expected to align to the Barrick DNA and drive a change within his team and the business and on a practical note will ensure activities in the Engineering Section are effectively planned and undertaken in a safe and cost effective manner to achieve targets in accordance to BGML Mining Safety Standards, Policies and Procedures.

Reporting to: Engineering Supervisor

Duration: Permanent

Responsibilities

Ensure safe work practices, i.e. attending compulsory safety courses and meetings, use of required PPE, incident/accident reporting and ensuring total adherence to all Safety, Occupational Health and Environmental Policies, as well as other relevant policies, procedures and guidelines
Knowledge of operating and switching for 220KV to 6.6KV
Install and maintain of all electrical equipment on electrical drills to reduce unplanned maintenance and optimize availability.
Ability to Use testing equipment, and troubleshooting complex electrical problems and develop effective resolutions
Overhaul electrical equipment in accordance with set company policies and procedures.
Ability to read and interpret drawing, schematics and distribution circuit maps.
Ensure safe work practices by attending compulsory safety courses and meetings;
Complete required testing and safety checks on electrical drills.
Ability to Generate Power with CAT generators
Attend to breakdowns and complete necessary fault-finding.
Carry out defined and necessary electrical equipment checks.
Ability to troubleshoot problems, effectively communicate and work as part of a team.
Complete modifications to electrical drills in accordance with specified instructions.
Under the direction of the supervisor, provide appropriate on-the-job training and coaching to less experience personnel.
Assist and conduct incident/accident investigations
Ensure safe working practices pertaining to high voltage electrical work, including ensuring clearances, and working on energized lines and equipment
Implementation and execution of all tasks and instructions as instructed by superiors

Qualification Requirements

Ordinary level certificate – Form IV
FTC certificate or Trade certificate in Electrical from a recognized training institution.
High Voltage Certificate obtained from a recognized training institution.
Must Possess Valid Tanzania Driving Licence Class D & E or C

Experience Requirements

5 Years’ experience on Industrial Electrical

Underground mining experience is an added advantage

Skills / Knowledge Requirements

High voltage installations & testing including inline joins, 11kv plug termination
Excellent interpersonal and electrical skills with the ability to assist the production electrical supervisor to lead and motivate a well-established electrical team.
Knowledge of main consumer substations, overhead power lines, main compressors, refrigeration plants, main ventilation fans, winders and shaft operations, emergency power generators, high and low voltage installations and reticulation diagrams for underground and surface operations.
Computer literate in the Microsoft Package Applications – Word, Excel, PowerPoint, Project and Visio
Communication, Fluent in written and verbal in English & Swahili

What We Can Offer You

A comprehensive compensation package including bonuses, benefits, and where applicable.
Ability to make a difference and lasting impact.
Work in a dynamic, collaborative, progressive, and high-performing team.
Opportunities to grow and learn with the industry colleagues are endless.

How To Apply

Applicants are invited to submit their CV’s/Resume’s, careful read application guidelines
Rename your CV in this format CV – YOUR FULL NAME
Indicating the role title “ HV ELECTRICIAN ” in the subject of your email

Send your application via e-mail to: [email protected]

Please forward applications before 02nd September 2021

Instrumentation Assistant

Reporting to: Process E&I Supervisor

Duration: Permanent

RESPONSIBILITIES:

Maintain a high standard of housekeeping in the work area both during and after completing a job. This includes returning used parts to stores, tools & equipment to designated areas, and spills cleaned up.
Assist and conduct incident/accident investigations;
Comply with Occupational Health and Environmental Policies, as well as other policies, procedures and guidelines;
Install and maintain of all instrumentation equipment on surface and underground to reduce unplanned maintenance and optimize availability.
Overhaul all instrumentation equipment on surface and underground in accordance with set company policies and procedures.
Complete required testing and safety checks on all instrumentation equipment on surface and underground.
Assist to attend breakdowns and complete necessary fault finding.
Assist in Maintaining control systems, PLC and SCADA with <5% Downtime.
Compliance to scheduled equipment inspections daily, weekly, Monthly & identified defects reported within the shift
Assist to carry out defined and necessary checks on all instrumentation equipment on surface and underground.
Carry out other task assigned by Process E&I Supervisor
Ensure safe work practices, i.e. attending compulsory safety courses and meetings, use of required PPE, incident/accident reporting and ensuring total adherence to all Safety, Occupational Health and Environmental Policies, as well as other relevant policies, procedures and guidelines

QUALIFICATION REQUIREMENTS:

Ordinary/advanced level certificate – Form IV/VI
Instrumentation Trade Certificate or Equivalent
Valid driving license is an added advantage

EXPERIENCE REQUIREMENTS:

1 Year Post qualified experience in Instruments installation, calibration, instrumentation, repairs and test instruments
1 Year Experience in Heavily Instrumented Plant in an Industrial Environment, Field Instrumentation and control networks, underground environment will be added advantage.

SKILLS / KNOWLEDGE REQUIREMENTS:

Excellent communication in English ,both writing and verbal
Hazard identification and Risk assessment
Mine health &Safety Act awareness

WHAT WE CAN OFFER YOU:

A comprehensive compensation package including bonuses, benefits, and where applicable.
Ability to make a difference and lasting impact.
Work in a dynamic, collaborative, progressive, and high-performing team.
Opportunities to grow and learn with the industry colleagues are endless.

HOW TO APPLY:

Applicants are invited to submit their CV’s/Resume’s, careful read application guidelines

Rename your CV in this format CV – YOUR FULL NAME

Indicating the role title “INSTRUMENTATION ASSISTANT“ in the subject of your email

Send your application via e-mail to: [email protected]

Please forward applications before 02nd September 2021

Bulyanhulu Gold Mine is seeking to recruit Fitter Assistant to join our team. The successful candidate for this position is expected to align to the Barrick DNA and drive a change within his team and the business and on a practical note will ensure activities in the Process Mechanical Section are effectively planned and undertaken in a safe and cost effective manner to achieve targets in accordance to BGML Mining Safety Standards, Policies and Procedures.

Reporting to: Process Mechanical Supervisor

Duration: Permanent

RESPONSIBILITIES:

To assist Fitter Perform engineering measurements
To assist Fitter to do effective faults diagnosis and conduct effective repairs of all breakdowns.
To assist Fitter with dismantling, replacing and assembling engineering components.
Compliance to Standard Operating Procedures for safe work daily –Isolation, Lockout, confined space, working at height, lifting & rigging etc.
To assist Fitter on plant inspections daily, weekly, monthly & identified defects reported within the shift
To assist Fitter on Equipment Preventive Maintenance Schedule & work carried out accordingly daily
Assist Fitter in installation & commissioning of new equipment as per Company Standard Operating Procedures- Risk Assessment, Procedure, Training, Competency Assessment
All possible hazards on route and inside workplaces identified, rectified and/or reported daily when on shift (minimum 5 when on shift)
Zero involvement in an incident/ accident, those occurred are reported to Leader within the Shift
7 Safety Interactions to be completed each week
Field Level Risk Assessment completed accurately for every task assigned
Team based Job Safety Analysis completed accurately for every task with a Standard Operating Procedure
Carry out housekeeping activities before and after every task completed
Attendance at the daily toolbox/ Line up meeting.
Maintain a high standard of housekeeping in the work area both during and after completing a job. This includes returning used parts to stores, tools, & equipment to designated areas, and spills cleaned up.
Competent in the use/operation of all required power tools and hand tools, inspected and maintained daily
Completing required Logbooks for Inspection daily, weekly, monthly
Ensure safe work practices, i.e. attending compulsory safety courses and meetings, use of required PPE, incident/accident reporting and ensuring total adherence to all Safety, Occupational Health and Environmental Policies, as well as other relevant policies, procedures and guidelines

QUALIFICATION REQUIREMENTS:

Ordinary level certificate – Form IV
Fitter trade certificate grade I

EXPERIENCE REQUIREMENTS:

1 Years’ experience in similar role. Experience in mining industry is added as an advantage

SKILLS / KNOWLEDGE REQUIREMENTS:

Good Communication Skills, English & Swahili
Demonstrates a high concern for health, safety and environment

WHAT WE CAN OFFER YOU:

A comprehensive compensation package including bonuses, benefits, and where applicable.
Ability to make a difference and lasting impact.
Work in a dynamic, collaborative, progressive, and high-performing team.
Opportunities to grow and learn with the industry colleagues are endless.

HOW TO APPLY:

Applicants are invited to submit their CV’s/Resume’s, careful read application guidelines

Rename your CV in this format CV – YOUR FULL NAME

Indicating the role title “FITTER ASSISTANT “ in the subject of your email

Send your application via e-mail to: [email protected]

Check also More Than 200+ New Jobs Available in Your City Apply Now