13 Job Opportunities at Shirika la Nyumbu (TATC)

13 Job Opportunities at Shirika la Nyumbu (TATC)




RESEARCH ASSISTANT – 6 POSTS

 

Tanzania Automotive Technology Centre (TATC) synonymously known as “Shirika la Nyumbu” was formally established on the 14th December 1985 through a Presidential Order, made under the Public Corporations Act 1969. TATC’s mission is to develop a reputable capacity for automotive engineering by conducting research and innovation, technology transfer and quality assurance services.

TATC is wholly owned by the Government of the United Republic of Tanzania through the Ministry of Defence and National Service (MoDNS).

TATC seeks to recruit intelligent and result-oriented Tanzanians with high integrity to fill 20 vacant posts mentioned below:-

RESEARCH ASSISTANT – 6 POSTS

Report to: Head of Research and Technology Development

Duties and Responsibilities

 

  • To engineer products and system failure investigation.
  • To determine appropriate materials for automotive engineering application
  • To rehabilitate engineering systems and processes for improved productivity.
  • To conduct consultancy works related to engineering research.
  • To conduct analysis on disposition of sub-standard materials such as downgrading, reprocessing or scraping.
  • To use Computer Aided Engineering in project development and promotion; and
  • To prepare artistic impressions of new concepts and products.

 

Qualifications

Holder of Bachelor Degree with a minimum of upper second class in one of the following fields: Mechanical Engineering, Electrical Engineering or Industrial Engineering from any recognized higher learning institution.

NB: GENERAL CONDITIONS

 

  • Applicants must attach an up to date Curriculum Vitae (CV) having reliable contact postal address, e-mail address, telephone number and three reputable referees with their reliable contacts.
  • The title of the position applied should be written in the subject of the application letter marked on the envelope.
  • Applicant must attach their relevant certified copies of academic certificates, one recent passport size picture and birth certificate.
  • Applicants who currently employed in the Public Service should route the application letters through their respective employers.
  • Application letter should be written in Swahili or English.
  • Application should be sent to the undersigned not later than 12nd August, 2021 at 4.00 PM




The Director General,

Private Bag, Nyumbu- Kibaha, PWANI.

Tel: 0738 341 330/0738 309 363

Only shortlisted candidates will be informed on a date of interview.

Remuneration will be according to TATC Scheme of Service.



Motor Vehicle Mechanics– 3 Posts

 

Tanzania Automotive Technology Centre (TATC) synonymously known as “Shirika la Nyumbu” was formally established on the 14th December 1985 through a Presidential Order, made under the Public Corporations Act 1969. TATC’s mission is to develop a reputable capacity for automotive engineering by conducting research and innovation, technology transfer and quality assurance services.

TATC is wholly owned by the Government of the United Republic of Tanzania through the Ministry of Defence and National Service (MoDNS).

TATC seeks to recruit intelligent and result-oriented Tanzanians with high integrity to fill 20 vacant posts mentioned below:-

Report to: Chief Workshop Engineer.

Motor Vehicle Mechanics– 3 Posts

Duties and Responsibilities

 

  • To conduct fault diagnostic in vehicles and vehicle systems.
  • To carry out preventive maintenance schedules for vehicles.
  • To cconduct vehicles inspections, repair, servicing and testing
  • To iinspect vehicles to detect faults before repair and verify Workmanship after repairs.
  • To assist vehicle Technicians in conducting major overhauls in vehicle systems.
  • To repair defect report and remedies of motor vehicles

 

Qualifications

Holder of form IV Certificate (CSEE) and NVTA1/ CBET II or Trade Test Grade II in one of the following field: Foundry, Electrical Installation, Motor Vehicle, Fitter Mechanics, Welding, Spray Painting and Panel Beating and Masonry equivalent qualifications from recognised institution.

NB: GENERAL CONDITIONS

 

  • Applicants must attach an up to date Curriculum Vitae (CV) having reliable contact postal address, e-mail address, telephone number and three reputable referees with their reliable contacts.
  • The title of the position applied should be written in the subject of the application letter marked on the envelope.
  • Applicant must attach their relevant certified copies of academic certificates, one recent passport size picture and birth certificate.
  • Applicants who currently employed in the Public Service should route the application letters through their respective employers.
  • Application letter should be written in Swahili or English.
  • Application should be sent to the undersigned not later than 12nd August, 2021 at 4.00 PM

 

The Director General,

Private Bag, Nyumbu- Kibaha, PWANI.

Tel: 0738 341 330/0738 309 363

Only shortlisted candidates will be informed on a date of interview.

Remuneration will be according to TATC Scheme of Service.



Foundry– 4 Posts

 

Tanzania Automotive Technology Centre (TATC) synonymously known as “Shirika la Nyumbu” was formally established on the 14th December 1985 through a Presidential Order, made under the Public Corporations Act 1969. TATC’s mission is to develop a reputable capacity for automotive engineering by conducting research and innovation, technology transfer and quality assurance services.

TATC is wholly owned by the Government of the United Republic of Tanzania through the Ministry of Defence and National Service (MoDNS).

TATC seeks to recruit intelligent and result-oriented Tanzanians with high integrity to fill 20 vacant posts mentioned below:-

Report to: Chief Workshop Engineer.

Duties and Responsibilities

Foundry- 4 Posts

 

  • To operate foundry equipment and machinery.
  • To pour molten metal into mould for casting.
  • To repair moulds.
  • To read and record temperatures of molten metal.
  • To make moulds of simple castings.
  • To make moulds in green and sodium silicate bonded sands.
  • To operate with high degree of confidence all simple foundry machines.
  • To operate heat treatment equipment and machinery.
  • To pack and protect parts against decarburization or scaling during treatment.
  • To set, read and record temperature of treatment furnace.
  • To carry out heat treatment of simple parts.
  • To make protective materials on parts intended for treatment.
  • To operate with high degree of confidence simple heat treatment furnace, being able to carry out annealing, hardening and tempering of simple parts.

 

Qualifications

Holder of form IV Certificate (CSEE) and NVTA1/ CBET II or Trade Test Grade II in one of the following field: Foundry, Electrical Installation, Motor Vehicle, Fitter Mechanics, Welding, Spray Painting and Panel Beating and Masonry equivalent qualifications from recognised institution.

NB: GENERAL CONDITIONS

 

  • Applicants must attach an up to date Curriculum Vitae (CV) having reliable contact postal address, e-mail address, telephone number and three reputable referees with their reliable contacts.
  • The title of the position applied should be written in the subject of the application letter marked on the envelope.
  • Applicant must attach their relevant certified copies of academic certificates, one recent passport size picture and birth certificate.
  • Applicants who currently employed in the Public Service should route the application letters through their respective employers.
  • Application letter should be written in Swahili or English.
  • Application should be sent to the undersigned not later than 12nd August, 2021 at 4.00 PM




The Director General,

Private Bag, Nyumbu- Kibaha, PWANI.

Tel: 0738 341 330/0738 309 363

Only shortlisted candidates will be informed on a date of interview.

Remuneration will be according to TATC Scheme of Service.



 

Dr.Galus Tarimo
Dr. Galus is a Medical Doctor who is licensed, registered, and allowed to practice medicine as a General Practitioner by the Medical Council of Tanganyika (in Tanzania). A master’s degree student enrolled at WU-California pursuing an MBA in Healthcare Administration. Dr. Galus has more than 4 years of experience in Blogging, Copywriting, and Search Engine Optimization (Google SEO) based on healthcare-related articles, financial market analysis, and educational content